Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 16.06.2025 05:27

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

the problem then depends on "how fast does the fuse operate?".

Edit 2024–10.

He then asserts :

What was your best revenge story?

At one ohm, the resistor has a maximum of 1 watt power.

2024–10–16 [ OO OLAOYE OYEBODE ]

Barnstars:

If Jesus was crucified by Governor Pontius Pilate, why does the Quran deny his death?

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

[image of Common-mode choke]

This is 'the assistant's answer'

What drove the tech right’s — and Elon Musk’s — big, failed bet on Trump - vox.com

He then describes the function of a fuse.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

Dow Jones Futures: Israel-Iran Attacks Hit Market; The Next AI Winners After Nvidia, Broadcom? - Investor's Business Daily

One is “what exactly is in a ‘surge protector’ ? ”

This one hit behind the barn.

but I think this circuit , shows a few more pieces.

After a series of tumors, woman’s odd-looking tongue explains everything - Ars Technica

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

The other is “what does a “fuse” do?”

What does a fuse do?

Why are Democrats at Q so desperate that they keep taking down my links to comments that prove the residents in Ohio have been filing complaints about the Haitians eating the local wildlife from ponds in the local parks? Election interference

The bolt then partially travels down the line to your home.

It also is a device that limits the change in current flow.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

What causes you to be tired all the time and major headaches?

These are simplified answers to the original question, and does not change anything I wrote above.

(Dc diagram shown, AC is similar).

But… the neutral is now “floating” because of the 1 ohm resistance.

Olympic Medalist MyKayla Skinner Says She Was 'Bullied' And 'Belittled' By Simone Biles, Applauds Riley Gaines - OutKick

This is where the MOV conducts again, and dissipated the energy.

I post the exact comment here.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

I haven’t eaten junk food for weeks, I ate dirty all-day yesterday, but I can’t even workout, why am I so tired?

2024–10–14 [Omar Gharbi Omar Gharbi ]

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

An AC voltage/ current source, and an ac inductive load.

When do you feel most peaceful ever?

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

At least they know the answer if they wanted it.

The third is lightning and “how it gets conducted into a home.”

What does it mean when I have a dream where my friend died? I had this dream last night where one of my friends died in a shootout and I woke up crying.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

so, what happens?

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

What is your analysis of Walter White from Breaking Bad?

What is lightning?

but this device (an Inductor) … impedes the rapid changes in the current.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

Why does a straight man like anal penetration?

So, the voltage could go up to 500 volts, and the fuse will not open up.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

nine

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

These devices are installed between the “hot” and “neutral” and protective ground.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

2024–10–10[John johnson John Johnson ]

Can the fuse protect the electronic devices from lightning instead of a surge protector.

For this case there are devices called Metal oxide varistors (MOV).

Because the load is inductive, the current lags the voltage.(by a bit).

A circuit breaker is similar, but is resettable.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

Here is a simplified AC power diagram.

It seems Mohan does not understand the difference between a comment and an Answer.

He then describes Rainy Season and Lightning.

[old diagram got deleted by accident]

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

There are two important concepts here.

This is where this question deviates from being a 'generic' question, and becomes more specific.

Upvotes:

Now when you have a certain ac resistance, then a current flows in a loop.

a photo is worth a thousand words.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

One

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

This device then solves the entire problem.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

A fuse is a non-resetable over current circuit protector.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

But it can get overloaded, and no longer works.

eight

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

There are three different concepts here that are getting confused.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

In schematic diagrams this is the symbol for a fuse:

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

First Sentence:

what exactly is a ‘surge’ protector?

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

The MOV will conduct when the voltage exceeds 50% of line voltage.